Drip irrigation pipe production line

Tube Diameter	Type
Tube Diameter	φ 12	φ 16	φ 20
Wall thickness	0.2-0.6mm	0.15-1.0mm	0.4-0.6mm
Wall thickness allowance	0.2 ± 0.05mm 0.6 ± 0.10mm	0.15 ± 0.03mm 1.0 ± 0.10mm	0.4 ± 0.05mm 0.6 ± 0.10mm

List of moulds provided

Tube type	φ 12mm	φ 16mm	φ 20mm
Dropping tube extruding mould	φ 12mm × 0.4-0.6mm	φ 16mm × 0.15-0.2mm φ 16mm × 0.4mm φ 16mm × 0.6mm φ 16mm × 0.8mm φ 16mm × 1 .0mm	φ 20 mm × 0.4mm φ 20mm × 0.6mm

　
The assembly line is well equipped, which is able to make dropping tube with embedded flat droppers , and also making buried dropping tube with embedded flat droppers .
--Speed of the assembly line (at wall thickness of 0.15mm) max. 170m/min
--For commercial production 140m/min
--When producing the dropping tube of 0.15mm in wall thickness, production 　speed shall be controlled at less than 100m/min. If the production speed is 　over 100m/min, special material for dropping tube shall be used .
--Min. (at wall thickness of 1.0mm) 40m/min ( φ 16mm)
--Max. embedding rate of droppers 600piece

--Height of assembly line's centerline 1000mm --Direction of the assembly line : from right to left --Color of the assembly line blue , white ( except for stainless steel ) --Unit packing length of the product 500m, 1000m , 2500m/reel Pulling speed 10~200m/min
--Atmospheric vacuum pressure -0.001~-0.002Kpa --Gross power of equipment 115kW --Installation length of equipment 32-40m --Weight of equipment about 4500kg